Two Components Polyurethane Adhesive

Two Components Polyurethane Adhesive for

Installation of Prefabricated Rubber Running Track Surface
Technical Index: 

1. Character: Component A-Liquid cement, Component B-Liquid

2. Color: Component A-Red, green, etc, Component B-Straw yellow

3. Inflammability: Component A-None, Component B-None

4. Blend ratio: A: B=4: 1

5. Viscosity(25° CMPa. S): Component A 6500-7500, Component B 500-600

6. Density(g/cm³ ): Component A-1.65, Component B-1.22

7. Blend density(g/cm³ ): 1.6(As per blend ratio A: B=4: 1)

8. Solid content: 30± 2%

9. Applicable temperature reach: 5° C-40° C

10. Opening hour: 1 hour

11. Storage period: 6 months

12. Packaging: 200 kgs/drum

Direction for Use: 

PU bond is AB two component glue specially used for splicing prefabricated rubber running track, rubber mats, artificial grass, after sufficient chemical reaction between material A and material B, a bond was formed steadily enabling prefabricated rubber running track, rubber mats, artificial grass reap a best adherence effect. 

Characteristics: 

Strong viscosity, appropriate spread, easy-to-operate, a good water-proof and weather-proof, stable function. 

Using method: 

1. No need to weigh when using, what one shall do is just to directly put the raw material from small barrel into the big one. 

2. Mix the two components in accordance with the determined ratio(A: B=4: 1), evenly pour it onto the adhesive belt after fully mixing. 

Matters need Attention: 

1. Sufficiently and evenly mix them with correct proportion

2. Run through the raw material within 1 hour

3. Keep container completely sealed, and store it in the place where with a sound ventilation condition, keep far away from the fire source and moisture